Kit Build

Going the Kit route is the recommended way to install GaggiMate. The store is now open at https://shop.gaggimate.eu/ and you can source it there by using the configurator or selecting the kit that matches your machine.

Contents

Pro - Gaggia Classic (M4 Thermistor + Pressure Fittings)

• GaggiMate Controller Pro PCB
• LilyGo T-RGB 2.1” Display
• AC SSR 40-DA
• K-Type M3/M4 Thermocouple - 0.5m
• Pressure Transducer 0 - 1.6MPa, 5V Supply, 0.5 - 4.5V Output
• Transducer gasket
• Wiring Kit
• 4mm ID 6mm OD PTFE Tube
• 6mm OD Pressure T-Fitting PE
• 6mm OD Pressure Fitting to G1/4 female

Pro - Gaggia Classic Pro / Evo / E24 (M4 Thermistor + Barbed Fittings)

• GaggiMate Controller Pro PCB
• LilyGo T-RGB 2.1” Display
• AC SSR 40-DA
• K-Type M3/M4 Thermocouple - 0.5m
• Pressure Transducer 0 - 1.6MPa, 5V Supply, 0.5 - 4.5V Output
• Transducer gasket
• Wiring Kit
• High Pressure Silicone braided hose
• 6mm Barb T-Fitting
• 6mm Barb to G1/4 female fitting
• Hose Clamps - 6-12mm

Pro - Rancilio Silvia (M3 Thermistor + G1/4 fittings)

• GaggiMate Controller Pro PCB
• LilyGo T-RGB 2.1” Display
• AC SSR 40-DA
• K-Type M3/M4 Thermocouple - 0.5m
• Pressure Transducer 0 - 1.6MPa, 5V Supply, 0.5 - 4.5V Output
• Transducer gasket
• Wiring Kit
• 4mm ID 6mm OD PTFE Tube
• 2x 6mm OD Pressure Fitting to G1/4 female
• G1/4 T-Fitting (male/male/male)

Standard Kit (M3/M4)

• GaggiMate Controller Pro PCB
• LilyGo T-RGB 2.1” Display
• AC SSR 40-DA
• K-Type M3/M4 Thermocouple - 0.5m
• Wiring Kit

Tools / Consumables you need

• Knife (or PTFE cutter if you get a variant with PTFE tubing and have one available)
• Screwdriver
• Wrench / Spanner
• Zipties (good to have)
• Cable labels/tape (good to have)